The degree of automation of the coaxial stripper in the industry is still very high, so it can be operated only after simple explanation and training by professional technicians. Moreover, the operation of the coaxial stripper is very simple and the maintenance cost of the machine is low, so it is a very good wire harness processing equipment. A, coaxial stripping machine preparation before operation 1, check whether the machine parts are loose, check whether the accessories are installed correctly. 2, commissioning of the machine, check whether the machine is running normally, with or without abnormal sound. 3, turn on the power supply, check whether the power indicator is normal, and check whether the machine is leaking back. 4. Confirm whether the processed wire is within the processing range of this machine. Second, the coaxial stripping machine operating rules and matters 1. According to the peeling length of cable and core wire required by the process documents, adjust the position of upper and lower (left and right) cutters, check whether the compressed air supply is normal, adjust the air flow of the cylinder, plug in the power supply, and control the equipment to start running with the foot switch. 2. After cutting several pieces, check the length of the product and the quality of the core wire to ensure that it conforms to the process documents. After checking that the product is qualified, start the machine normally for continuous production. 3, stripping process, hands can't enter the inside of the shield, in case the machine cuts people. 4. If you stop the machine halfway, please unplug the power plug, so that people can leave and the machine will be cut off, so as to prevent others from accidentally stepping on the foot switch and causing pinch injury. 5. If you need to replace the wire stripping blade, you must first cut off power and gas before replacing it. Iii. Matters needing attention in the use of coaxial stripper 1. Operators of the coaxial wire stripper must be trained by professionals. Operators should be familiar with the general performance and structure of the machine and master the prevention, judgment and emergency treatment measures of equipment failures. 2. Stop the machine when you leave the machine in the production process, so that people can stop when they leave the machine. 3. Do not put your fingers near the tool holder and chuck during the operation of the machine to prevent pinching. 4. Stop the machine immediately in case of failure, and cut off the power supply in case of short circuit, smoke and leakage. The machine can only be started after troubleshooting, and the equipment shall not be overloaded with failure.
Welcome to Shenzhen Modern Intelligent Equipment Co., LTD.
Shenzhen Modern Intelligent Equipment Co., Ltd.
Years of manufacturing experience Focus on Seiko quality
-
免费咨询热线
13590387953
Safe operation of coaxial stripping machine
Source： Time：2020-11-25 11:53:37 views：
The degree of automation of the coaxial stripper in the industry is still very high, so it can be operated only after simple explanation and training by professional technicians. Moreover, the operation of the coaxial stripper is very simple and the maintenance cost of the machine is low, so it is a very good wire harness processing equipment.
