Automatic stripping machine is a very popular wire harness processing equipment at present, with complete functions and many processing methods, such as cutting, peeling, semi-peeling, intermediate peeling, wire twisting and other functions can be realized. The automatic stripping machine with multiple functions can be said to be a good helper for wire harness processing. And is this kind of equipment difficult to operate? One: Before homework 1. Before operation, the operating staff shall conduct spot check in strict accordance with the spot check system of this kind of equipment and make records; 2. Before starting the machine, it is necessary to check whether the accessories of the machine are installed correctly, and it can be started only after it is confirmed that there is no problem. 3. Confirm that the wire cutting die is in good condition, reliable in installation and well lubricated; Automatic stripping machine Two: In the homework 1. According to the peeling length of cable and core wire required by the process documents, adjust the position of upper and lower (left and right) cutters, check whether the compressed air supply is normal, adjust the air flow of the cylinder, plug in the power supply, and control the equipment to start running with the foot switch. 2. After cutting several pieces, check the length of the product and the quality of the core wire to ensure that it conforms to the process documents. After checking that the product is qualified, start the machine normally for continuous production. 3, stripping process, hands can't enter the inside of the shield, in case the machine cuts people. 4. If you stop the machine halfway, please unplug the power plug, so that people can leave and the machine will be cut off, so as to prevent others from accidentally stepping on the foot switch and causing pinch injury. 5. If you need to replace the wire stripping blade, you must first cut off power and gas before replacing it. 6. If any abnormality is found during use, the power shall be cut off immediately, and the professional maintenance personnel shall be notified for maintenance. 7, homework, the operator concentration, it is forbidden to do things that have nothing to do with production. Three: End of homework 1, after the implementation of the production plan, should turn off the power supply equipment; 2. Before coming off work, turn off the main power supply of the equipment and clean the machine and the surrounding sanitation. At present, the era of machine automation is becoming more and more popular, and people's requirements for wire harness processing equipment are definitely getting higher and higher. At present, the automatic stripping machine technology is very mature, so it is very necessary to know the knowledge of related mechanical equipment. I hope this safety operation regulation of automatic stripping machine can help you.
Welcome to Shenzhen Modern Intelligent Equipment Co., LTD.
Shenzhen Modern Intelligent Equipment Co., Ltd.
Years of manufacturing experience Focus on Seiko quality
-
免费咨询热线
13590387953
Safety operation procedures of automatic wire stripping machine
Source： Time：2020-11-25 11:53:28 views：
Automatic stripping machine is a very popular wire harness processing equipment at present, with complete functions and many processing methods, such as cutting, peeling, semi-peeling, intermediate peeling, wire twisting and other functions can be realized. The automatic stripping machine with multiple functions can be said to be a good helper for wire harness processing. And is this kind of equipment difficult to operate?
